DatasheetsPDF.com

LF398A

National Semiconductor
Part Number LF398A
Manufacturer National Semiconductor
Description Monolithic Sample-and-Hold Circuits
Published Mar 22, 2005
Detailed Description LF198/LF298/LF398, LF198A/LF398A Monolithic Sample-and-Hold Circuits July 2000 LF198/LF298/LF398, LF198A/LF398A Monoli...
Datasheet PDF File LF398A PDF File

LF398A
LF398A

Overview
LF198/LF298/LF398, LF198A/LF398A Monolithic Sample-and-Hold Circuits July 2000 LF198/LF298/LF398, LF198A/LF398A Monolithic Sample-and-Hold Circuits General Description The LF198/LF298/LF398 are monolithic sample-and-hold circuits which utilize BI-FET technology to obtain ultra-high dc accuracy with fast acquisition of signal and low droop rate.
Operating as a unity gain follower, dc gain accuracy is 0.
002% typical and acquisition time is as low as 6 µs to 0.
01%.
A bipolar input stage is used to achieve low offset voltage and wide bandwidth.
Input offset adjust is accomplished with a single pin, and does not degrade input offset drift.
The wide bandwidth allows the LF198 to be included inside the feedback loop of 1 MHz op amps without having stability problems.
Input impedance of 1010Ω allows high source impedances to be used without degrading accuracy.
P-channel junction FET’s are combined with bipolar devices in the output amplifier to give droop rates as low as 5 mV/min with a 1 µF hold capacitor.
The JFET’s have much lower noise than MOS devices used in previous designs and do not exhibit high temperature instabilities.
The overall design guarantees no feed-through from input to output in the hold mode, even for input signals equal to the supply voltages.
Features n Operates from ±5V to ±18V supplies n Less than 10 µs acquisition time n TTL, PMOS, CMOS compatible logic input n 0.
5 mV typical hold step at Ch = 0.
01 µF n Low input offset n 0.
002% gain accuracy n Low output noise in hold mode n Input characteristics do not change during hold mode n High supply rejection ratio in sample or hold n Wide bandwidth n Space qualified, JM38510 Logic inputs on the LF198 are fully differential with low input current, allowing direct connection to TTL, PMOS, and CMOS.
Differential threshold is 1.
4V.
The LF198 will operate from ±5V to ±18V supplies.
An “A” version is available with tightened electrical specifications.
Typical Connection and Performance Curve Acquisition ...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)