DatasheetsPDF.com

AX1008

AXElite
Part Number AX1008
Manufacturer AXElite
Description 5A Low Dropout Linear Regulator
Published Jul 17, 2014
Detailed Description AX1008 5A Low Dropout Linear Regulator  GENERAL DESCRIPTION AX1008 is a low dropout positive adjustable or fixed-mode r...
Datasheet PDF File AX1008 PDF File

AX1008
AX1008

Overview
AX1008 5A Low Dropout Linear Regulator  GENERAL DESCRIPTION AX1008 is a low dropout positive adjustable or fixed-mode regulator with minimum of 5.
0A output current capability.
The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.
3V logic supply.
AX1008 is also well suited for other applications such as VGA cards.
AX1008 is guaranteed to have lower than 1.
5V dropout at full load current making it ideal to provide well-regulated outputs of 1.
2V to 5V.
 FEATURES 1.
5V maximum dropout at full load current Built-in thermal shutdown Output current limiting Adjustable and 1.
2V/1.
5V/1.
8V/2.
5V/3.
3V/5.
0V fixed output voltages 10uF or greater MLCCs are available for stability Fast transient response Good noise rejection Package: TO252-3L, TO263-2L, TO220-3L  BLOCK DIAGRAM VÛmw`R•yÑb€ 2 VOUT VIN 3 w.
goftechm + + CURRENT LIMIT 1.
25V + 1 + Thermal Shutdown GND (FIXED) - 1 Adj 1/10 Axelite Confidential Materials, do not copy or distribute without written consent.
Rev.
1.
6 Dec.
24, 2012 AX1008  PIN ASSIGNMENT The packages of AX1008 are TO263-2L, TO220-3L and TO252-3L; the pin assignment is given by: Top View 3 Metal Tap VOUT TO263-2L 2 1 VIN VOUT Adj (GND) Metal Tap VOUT TO220-3L Top View 3 2 1 VIN Metal VOUT Tap VOUT Adj (GND) Top View 3 2 1 TO252-3L VIN VOUT Adj (GND) Name Adj (GND) VOUT Description Adjustable (Ground only for fixed version) A resistor divider from this pin to the VOUT pin and ground sets the output voltage.
The output of the regulator.
A minimum of 100uF aluminum electrolytic capacitor (ESR ≤ 5Ω) or 10uF MLCC must be connected from this pin to ground to insure stability.
The input pin of regulator.
Typically a large storage capacitor (ESR ≤ 5Ω) is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response.
This pin must always be 1.
4V higher than VOUT in ord...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)