DatasheetsPDF.com

AX1006

AXElite
Part Number AX1006
Manufacturer AXElite
Description 400mA Low Dropout Linear Regulator
Published Jul 23, 2014
Detailed Description AX1006 400mA Low Dropout Linear Regulator  GENERAL DESCRIPTION AX1006 is a low dropout positive adjustable or fixed-mod...
Datasheet PDF File AX1006 PDF File

AX1006
AX1006

Overview
AX1006 400mA Low Dropout Linear Regulator  GENERAL DESCRIPTION AX1006 is a low dropout positive adjustable or fixed-mode regulator with minimum of 400mA output current capability.
The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.
3V logic supply.
AX1006 is also well suited for other applications such as VGA cards.
AX1006 is guaranteed to have lower than 1.
2V dropout at full load current making it ideal to provide well-regulated outputs of 1.
25 to 5.
0 with VOUT+1.
2V to 12V input supply VOLTAGE.
 FEATURES 1.
2V maximum dropout at full load current Fast transient response Output current limiting Built-in thermal shutdown Good noise rejection MLCC Capacitors are available.
3-Terminal Adjustable or Fixed 1.
2V, 1.
5V, 1.
8V, 2.
5V, 3.
3V, 5.
0V Package: SOT-23-3L.
 APPLICATION CIRCUIT Fixed Output VIN =5V VIN C1 0.
2uF VOUT C2 0.
2uF VOUT =3.
3V ADJ Output VIN =5V VIN C1 0.
2uF VOUT R1 240 C2 0.
2uF VOUT =3.
3V GND AX1006-33 ADJ AX1006- ADJ R2 390 VOUT  VREF  (1  R2 );VREF  1.
250V R1 1/8 Axelite Confidential Materials, do not copy or distribute without written consent.
Rev.
1.
2 May.
31, 2011 AX1006  PIN ASSIGNMENT The package of AX1006 is SOT-23-3L; the pin assignment is given by: Name (Top View) VOUT 3 Description AX1006 1 GND 2 VIN SOT-23-3L A resistor divider from this pin to Adj the VOUT pin and ground sets the (GND) output voltage.
(Ground only for Fixed-Mode) The output of the regulator.
VOUT (Note1,2) The input pin of regulator.
Typically a large storage capacitor is connected from this pin to ground to insure that the input voltage does not sag below VIN the minimum dropout voltage during the load transient response.
This pin must always be 1.
5V higher than VOUT in order for the device to regulate properly.
(Note1) Note1: To prevent oscillation, a 0.
2uF minimum X7R or X5R dielectric is strongly recommended if ceramics are used as output capacitors.
No...


Similar Datasheet


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site. (Privacy Policy & Contact)