AP513 Module Datasheet

AP513 Datasheet PDF, Equivalent


Part Number

AP513

Description

8W HBT Amplifier Module

Manufacture

WJ Communications

Total Page 5 Pages
Datasheet
Download AP513 Datasheet


AP513
www.DataSheet4U.com
AP513
DCS-band 8W HBT Amplifier Module
The Communications Edge TM
Product Information
Product Features
Product Description
Functional Diagram
1805 – 1880 MHz
30 dB Gain
-64 dBc ACPR
@ 28 dBm CDMA2k 7fa Power
+39 dBm P1dB
+12 V Single Supply
Power Down Mode
Bias Current Adjustable
RoHS-complaint flange-mount pkg
Applications
Final stage amplifiers for Repeaters
Optimized for driver amplifier PA
mobile infrastructure
The AP513 is a high dynamic range power amplifier in a
RoHS-compliant flange-mount package. The multi-stage
amplifier module has 30 dB gain, while being able to achieve
high performance for DCS-band applications with +39 dBm
of compressed 1dB power. The module has been internally
optimized for linearity to provide -64 dBc ACPR at 28 dBm
power for 7-carrier CDMA2000 applications.
The AP513 uses a high reliability InGaP/GaAs HBT process
technology and does not require any external matching
components. The module operates off of a +12V supply and
does not requiring any negative biasing voltages; an internal
active bias allows the amplifier to maintain high linearity
over temperature. It has the added feature of a +5V power
down control pin. A low-cost metal housing allows the
device to have a low thermal resistance and achieves over
100 years MTTF. All devices are 100% RF and DC tested.
The AP513 is targeted for use as a driver or final stage
amplifier in wireless infrastructure where high linearity and
high power is required. This combination makes the device an
excellent candidate for next generation multi-carrier 3G base
stations or repeaters using the DCS1800 frequency band.
123
456
Top View
Pin No.
1
2/4
3/5
6
Case
Function
RF Output
Vcc
Vpd
RF Input
Ground
Specifications (1)
Parameter
Operational Bandwidth
Test Frequency
Adjacent Channel Power Ratio
Power Gain
Input Return Loss
Output Return Loss
Output P1dB
Output IP3
Operating Current (2)
Quiescent Current, Icq (2)
Device Voltage, Vcc
Device Voltage, Vpd
Ruggedness
Units
MHz
MHz
dBc
dB
dB
dB
dBm
dBm
A
A
V
V
VSWR
Min Typ Max
1805 – 1880
1840
-63.6 -60
27.8 30.3 32.8
14
7.8
+39
+50
1.67
1.55 1.70 1.80
+12
+5
10:1
Test Conditions
CDMA2000 7fa +28 dBm Total Power, ±885 kHz offset
Pout = +28 dBm
Pout = +28 dBm/tone, Δf = 1 MHz
Pout = +28 dBm
Pull-down voltage: 0V = “OFF”, 5V=”ON”
Pout = +39 dBm CW, all phases
1. Test conditions unless otherwise noted: 25 ºC.
2. The current can be adjusted through an external resistor from the 5V supply to the pull-down voltage pin (pin 3).
Absolute Maximum Rating
Parameter
Operating Case Temperature
Storage Temperature
RF Input Power (continuous)
CDMA2000 signal (fwd link, PAR 10.5 dB @ .01% prob)
Rating
-40 to +85 °C
-55 to +150 °C
+10 dBm
Ordering Information
Part No.
AP513
AP513-PCB
Description
DCS-band 8W HBT Amplifier Module
Fully-Assembled Evaluation Board
Operation of this device above any of these parameters may cause permanent damage.
Specifications and information are subject to change without notice
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: sales@wj.com Web site: www.wj.com
Page 1 of 5 June 2006

AP513
www.DataSheet4U.com
AP513
DCS-band 8W HBT Amplifier Module
The Communications Edge TM
Product Information
Class AB Configuration (AP513-PCB)
The AP513-PCB and AP513 module is configured for Class AB by default. The resistor – R7 – which sets the current draw for
the amplifier is set at 0 in this configuration. Increasing that value will decrease the quiescent and operating current of the
amplifier module, as described on the next page.
DNP
10μF
00
RF IN
DNP
DNP
0
DNP
DNP
100pF
.01μF
DNP
DNP
6 54 32 1
.01μF
100pF
0
DNP
RF OUT
DNP
Notes:
1. Please note that for reliable operation, the evaluation board and
mounting plate will have to be attached to a much larger heat sink
during operation and in laboratory environments to dissipate the
power consumed by the device. The use of a convection fan is also
recommended in laboratory environments. Details of the mounting holes
used in the WJ mounting plate are given on the last page of this datasheet.
2. The area around the module underneath the PCB should not contain any
soldermask in order to maintain good RF grounding.
3. For proper and safe operation in the laboratory, the power-on sequencing
should be followed:
1. Connect RF In and Out
2. Connect the voltages and ground pins as shown in the circuit.
3. Apply the RF signal
4. Power down with the reverse sequence
Specifications and information are subject to change without notice
WJ Communications, Inc Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: sales@wj.com Web site: www.wj.com
Page 2 of 5 June 2006


Features www.DataSheet4U.com AP513 Product Featu res • 1805 – 1880 MHz • 30 dB Gai n • -64 dBc ACPR @ 28 dBm CDMA2k 7fa Power The Communications Edge TM Produ ct Information DCS-band 8W HBT Amplifi er Module Product Description The AP51 3 is a high dynamic range power amplifi er in a RoHS-compliant flange-mount pac kage. The multi-stage amplifier module has 30 dB gain, while being able to ach ieve high performance for DCS-band appl ications with +39 dBm of compressed 1dB power. The module has been internally optimized for linearity to provide -64 dBc ACPR at 28 dBm power for 7-carrier CDMA2000 applications. The AP513 uses a high reliability InGaP/GaAs HBT proces s technology and does not require any e xternal matching components. The module operates off of a +12V supply and does not requiring any negative biasing vol tages; an internal active bias allows t he amplifier to maintain high linearity over temperature. It has the added fea ture of a +5V power down control pin. A low-cost metal housing allows t.
Keywords AP513, datasheet, pdf, WJ Communications, 8W, HBT, Amplifier, Module, P513, 513, 13, AP51, AP5, AP, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)