Capacitors Tantalum-Case. 135D Datasheet

135D Tantalum-Case. Datasheet pdf. Equivalent

135D Datasheet
Recommendation 135D Datasheet
Part 135D
Description Wet Tantalum Capacitors Tantalum-Case
Feature 135D; 135D Vishay Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal For - 55 °C t.
Manufacture Vishay Siliconix
Datasheet
Download 135D Datasheet





Vishay Siliconix 135D
135D
Vishay
Wet Tantalum Capacitors
Tantalum-Case with Glass-to-Tantalum Hermetic Seal
For - 55 °C to + 200 °C Operation
FEATURES
Terminations : standard Tin/lead (SnPb), 100 %
Tin (RoHS compliant) available
Available
Standard and Extended Ratings
RoHS*
COMPLIANT
Model 135D tantalum-case tantalum electrolytic
capacitors incorporate the advantages of all the varieties of
electrolytic capacitors and eliminate most of the
disadvantages. These units have a 3 volt reverse voltage
capability at + 85 °C and a higher ripple current capability
than any other electrolytic type with similar combinations of
capacitance and case size.
Designed for the aerospace applications, this capacitor
was developed under partial sponsorship of the Marshall
Space Flight Center, National Aeronautics and Space
Administration. The capacitors have a high resistance to
damage from shock and vibration. Extended range ratings
and high temperature designs are available.
Model 135D capacitors are commercial equivalents of
Tansitor Style; AQ, AR, HAQ, HAR, Mallory-NACC Style;
TLT, TXT, THT, THX and Military Style CLR79 and CLR81,
designed to meet the performance requirements of Military
Specification MIL-PRF-39006/22/25. Capacitors to meet
MILPRF- 39006/22/25 should be ordered by part numbers
shown in that specification.
www.DataSheet4U.coPm ERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C.
(To + 200 °C with voltage derating.)
Capacitance Tolerance: At 120 Hz, + 25 °C. ± 20 %
standard. ± 10 %, ± 5 % available as special.
DC Leakage Current (DCL Max.): At + 25 °C and above:
Leakage current shall not exceed the values listed in the
Standard Ratings Tables.
Life Test: Capacitors are capable of withstanding a 2000
hour life test at a temperature of + 85 °C or + 125 °C at the
applicable rated DC working voltage.
Following life test:
1. DCL, measured at + 85 °C rated voltage, shall not be in
excess of the original requirement.
2. The equivalent series resistance shall not exceed 150 %
of the initial requirement.
3. Change in capacitance shall not exceed 10 % from the
initial measurement.
ORDERING INFORMATION
135D
306
X0
MODEL CAPACITANCE CAPACITANCE
TOLERANCE
This is expressed
in picofarads. The
first two digits are
the significant
figures. The third
is the number of
zeros to follow.
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
006
DC VOLTAGE RATING
AT + 85 °C
This is expressed in volts.
To complete the
three-digit block, zeros
precede the voltage
rating. A decimal point is
indicated by an "R"
(6R3 = 6.3 volts).
C
CASE CODE
See Ratings
and
Case Codes
Table.
2
STYLE NUMBER
Standard
0 = No outer tube.
2 = Outer polyesterfilm
insulation.
High Temperature
8 = No outer tube.
6 = High temperature film
insulation (above + 125 °C).
E3
RoHS COMPLIANT
E3 = 100 % tin
termination (RoHS
compliant design)
Blank = SnPb
termination
(standard design)
Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not
recommended due to the unit weight.
* Pb containing terminations are not RoHS compliant, exemptions may apply
www.vishay.com
2
For technical questions, contact: wettants@vishay.com
Document Number: 40024
Revision: 26-Sep-06



Vishay Siliconix 135D
Wet Tantalum Capacitors
Tantalum-Case with Glass-to-Tantalum Hermetic Seal
For - 55 °C to + 200 °C Operation
DIMENSIONS in inches [millimeters]
E
L1
E
135D
Vishay
D
0.0253 ± 0.002 [0.64 ± 0.05] Dia.
(No. 22 AWG) Tinned Nickel Leads
Solderable and Weldable
Weld
Tantalum
L2
CASE CODE
TYPE DCLR 79/81
135D EQUIV.
D
L1
L2 (Max.)
E
C T1
0.188 ± 0.016
[4.78 ± 0.41]
0.453 + 0.031 - 0.016
[11.51 + 0.79 - 0.41]
0.734
[18.64]
1.500 ± 0.250
[38.10 ± 6.35]
F T2
0.281 ± 0.016
[7.14 ± 0.41]
0.641 + 0.031 - 0.016
[16.28 + 0.79 - 0.41]
0.922
[23.42]
2.250 ± 0.250
[57.15 ± 6.35]
T T3
0.375 ± 0.016
[9.53 ± 0.41]
0.766 + 0.031 - 0.016
[19.46 + 0.79 - 0.41]
1.047
[26.59]
2.250 ± 0.250
[57.15 ± 6.35]
K T4
0.375 ± 0.016
[9.53 ± 0.41]
1.062 + 0.031 - 0.016
[26.97 + 0.79 - 0.41]
1.343
[34.11]
2.250 ± 0.250
[57.15 ± 6.35]
*For insulated parts, add 0.015" [0.38] to the diameter. The insulation shall lap over the ends of the capacitor body.
WEIGHT
IN GRAMS
(Max.)
2.6
6.2
11.6
17.7
STANDARD RATINGS
CAPACITANCE CASE
(µF) CODE
PART NUMBER*
Max. ESR
at
+ 25 °C
120 Hz
(Ohms)
Max. IMP.
at
- 55 °C
120 Hz
(Ohms)
Max. DCL (µA)
at
Max. CAPACITANCE CHANGE
(%) at
+ 25 °C
+ 85 °C
+ 125 °C
- 55 °C
+ 85 °C + 125 °C
Max.
RIPPLE
40 kHz
rms
(mA)
6 WVDC at + 85 °C . . . 4 WVDC at + 125 °C. . . 3.6 WVDC at + 200 °C
30
C 135D306X0006C2
4.0
100
1.0
2.0
- 40 + 10.5 + 12
820
68
C 135D686X0006C2
3.2
60
1.0 2.0 - 40 + 14 + 16 960
140
F 135D147X0006F2
2.0
40
1.0 3.0 - 40 + 14 + 16 1200
270
330
560
1200
25
56
F 135D277X0006F2
2.2
25
1.0 6.5 - 44 + 17.5
T 135D337X0006T2
1.4
20
2.0 7.9 - 44 + 14
T 135D567X0006T2
1.3
25
2.0 13.0 - 64 + 17.5
K 135D128X0006K2
1.0
20
3.0 14.0 - 80 + 25
8 WVDC at + 85 °C . . . 5 WVDC at + 125 °C . . . 4.8 WVDC at + 200 °C
C 135D256X0008C2
4.0
100
1.0 2.0 - 40 + 10.5
C 135D566X0008C2
3.3
59
1.0 2.0 - 40 + 14
+ 20
+ 16
+ 20
+ 25
+ 12
+ 16
1375
1800
1900
2265
820
900
120
F 135D127X0008F2
2.6
50
1.0
2.0
- 44 + 17.5 + 20
1230
220
F 135D227X0008F2
2.4
30
1.0
7.0
- 44 + 17.5 + 20
1370
290
T 135D297X0008T2
1.8
25
2.0
6.0
- 64 + 17.5 + 20
1770
430
T 135D437X0008T2
1.4
25
2.0
14.0
- 64 + 17.5 + 20
1825
850
K 135D857X0008K2
1.0
22
4.0 16.0 - 80 + 25 + 25 2330
10 WVDC at + 85 °C . . . 7 WVDC at + 125 °C . . . 6 WVDC at + 200 °C
20
C 135D206X0010C2
4.0
120
1.0
2.0
- 32 + 10.5 + 12
820
47
C 135D476X0010C2
3.7
90
1.0 2.0 - 36 + 14 + 16 855
100
F 135D107X0010F2
2.4
60
1.0 4.0 - 36 + 14 + 16 1200
180
F 135D187X0010F2
2.2
40
1.0 7.0 - 36 + 14 + 16 1365
250
T 135D257X0010T2
1.8
30
2.0 10.0 - 40 + 14 + 16 1720
390
T 135D397X0010T2
1.5
25
2.0
16.0
- 64 + 17.5 + 20
1800
750
K 135D757X0010K2
1.0
23
4.0 16.0 - 80 + 25 + 25 2360
15 WVDC at + 85 °C . . . 10 WVDC at + 125 °C . . . 9 WVDC at + 200 °C
15
C 135D156X0015C2
4.4
155
1.0
2.0
- 24 + 10.5 + 12
780
33
C 135D336X0015C2
4.0
90
1.0 2.0 - 28 + 14 + 16 820
70
F 135D706X0015F2
2.8
75
1.0 4.0 - 28 + 14 + 16 1150
120
F 135D127X0015F2
2.6
50
1.0
7.0
- 28 + 17.5 + 20
1450
170
T 135D177X0015T2
2.4
35
2.0 10.0 - 32 + 14 + 16 1480
270
T 135D277X0015T2
2.2
30
2.0
16.0
- 56 + 17.5 + 20
1740
540
K 135D547X0015K2
1.0
23
6.0 24.0 - 80 + 25 + 25 2330
* Part Numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit
following the letter "X" from "0" to "9"; for ± 5 %, change the digit following the letter "X" from "0" to "5". For capacitors without outer
polyester-film insulation, change the last digit in the part number from "2" to "0". For capacitors with a high temperature insulating sleeve,
change the last digit in the part number from "2" to "6". For RoHS compliant add “E3”.
Document Number: 40024
Revision: 26-Sep-06
For technical questions, contact: wettants@vishay.com
www.vishay.com
3



Vishay Siliconix 135D
135D
Vishay
Wet Tantalum Capacitors
Tantalum-Case with Glass-to-Tantalum Hermetic Seal
For - 55 °C to + 200 °C Operation
STANDARD RATINGS
CAPACITANCE CASE
(µF) CODE
PART NUMBER*
Max. ESR
at
+ 25 °C
120 Hz
(Ohms)
Max. IMP.
at
- 55 °C
120 Hz
(Ohms)
Max. DCL (µA)
at
Max. CAPACITANCE CHANGE
(%) at
+ 25 °C
+ 85 °C
+ 125 °C
- 55 °C
+ 85 °C + 125 °C
Max.
RIPPLE
40 kHz
rms
(mA)
25 WVDC at + 85 °C . . . 15 WVDC at + 125 °C . . . 12 WVDC at + 200 °C
10
C 135D106X0025C2
5.3
220
1.0 2.0 - 16 + 8 + 9
715
22
C 135D226X0025C2
4.2
140
1.0
2.0
- 20 + 10.5 + 12
800
50
F 135D506X0025F2
3.0
70
1.0 2.0 - 28 + 13 + 15 1130
100
F 135D107X0025F2
2.8
50
1.0 10.0 - 28 + 13 + 15 1435
120
T 135D127X0025T2
2.6
38
2.0 6.0 - 32 + 13 + 15 1450
180
T 135D187X0025T2
2.2
32
2.0 18.0 - 48 + 13 + 15 1525
350
K 135D357X0025K2
1.3
24
7.0 28.0 - 70 + 25 + 25 1970
30 WVDC at + 85 °C . . . 20 WVDC at + 125 °C . . . 18 WVDC at + 200 °C
8
C 135D805X0030C2
6.6
275
1.0 2.0 - 16 + 8 + 12 640
15
C 135D156X0030C2
6.2
175
1.0
2.0
- 20 + 10.5 + 12
780
40
F 135D406X0030F2
4.0
65
1.0
5.0
- 24 + 10.5 + 12
1120
68
F 135D686X0030F2
2.9
60
1.0 8.0 - 24 + 13 + 15 1285
100
T 135D107X0030T2
2.7
40
2.0
12.0
- 28 + 10.5 + 12
1450
150
T 135D157X0030T2
2.3
35
2.0 18.0 - 48 + 13 + 15 1525
300
K 135D307X0030K2
1.4
25
8.0 32.0 - 60 + 25 + 25 1950
35 WVDC at + 85 °C . . . 22 WVDC at + 125 °C . . . 21 WVDC at + 200 °C
15
C 135D156X0035C2
6.2
175 0.75 1.5 - 20 + 10.5 + 12 660
68
F 135D686X0035F2
2.9
60
1.0 2.0 - 24 + 13 + 15 1195
270
K 135D277X0035K2
1.4
26
3.0 12.0 - 58 + 25 + 25 1950
50 WVDC at + 85 °C . . . 30 WVDC at + 125 °C . . . 30 WVDC at + 200 °C
5
C 135D505X0050C2
8.0
400
1.0 2.0 - 16 + 5 + 6
580
10
C 135D106X0050C2
6.4
250
1.0 2.0 - 24 + 8 + 9
715
25
F 135D256X0050F2
4.6
95
1.0
5.0
- 20 + 10.5 + 12
1005
47
F 135D476X0050F2
3.7
70
1.0 9.0 - 28 + 13 + 15 1155
60
T 135D606X0050T2
2.9
45
2.0
12.0
- 16 + 10.5 + 12
1335
82
T 135D826X0050T2
2.5
45
2.0 16.0 - 32 + 13 + 15 1400
160
K 135D167X0050K2
1.5
27
8.0 32.0 - 50 + 25 + 25 1900
60 WVDC at + 85 °C . . . 40 WVDC at + 125 °C . . . 36 WVDC at + 200 °C
4
C 135D405X0060C2
9.3
550
1.0 2.0 - 16 + 5 + 6
525
8.2
C 135D825X0060C2
6.6
275
1.0 2.0 - 24 + 8 + 9
625
20
F 135D206X0060F2
4.7
105
1.0 5.0 - 16 + 8 + 9
930
39
F 135D396X0060F2
3.4
90
1.0
9.0
- 28 + 10.5 + 15
1110
50
T 135D506X0060T2
2.9
50
2.0
12.0
- 16 + 10.5 + 12
1330
68
T 135D686X0060T2
2.5
50
2.0
16.0
- 32 + 10.5 + 15
1365
140
K 135D147X0060K2
1.5
28
8.0 32.0 - 40 + 20 + 20 1850
75 WVDC at + 85 °C . . . 50 WVDC at + 125 °C . . . 45 WVDC at + 200 °C
3.5
C 135D355X0075C2
9.5
650
1.0 2.0 - 16 + 5 + 6
525
6.8
C 135D685X0075C2
6.8
300
1.0 2.0 - 20 + 8 + 9
610
15
F 135D156X0075F2
5.3
150
1.0 5.0 - 16 + 8 + 9
890
33
F 135D336X0075F2
4.2
90
1.0
10.0
- 24 + 10.5 + 15
1000
40
T 135D406X0075T2
3.0
60
2.0
12.0
- 16 + 10.5 + 12
1250
56
T 135D566X0075T2
2.6
60
2.0
17.0
- 28 + 10.5 + 15
1335
110
K 135D117X0075K2
1.5
29
9.0 36 .0 - 35 + 20 + 20 1850
100 WVDC at + 85 °C . . . 65 WVDC at + 125 °C . . . 60 WVDC at + 200 °C
2.5
C 135D255X0100C2 10.6
950
1.0
2.0 - 16 + 7
+8
505
4.7
C 135D475X0100C2
8.5
500
1.0 2.0 - 16 + 7 + 8
565
11
F 135D116X0100F2
6.0
200
1.0 4.0 - 16 + 7 + 8
835
22
F 135D226X0100F2
4.8
100
1.0 9.0 - 16 + 7 + 8
965
30
T 135D306X0100T2
3.3
80
2.0 12.0 - 16 + 7 + 8 1240
43
T 135D436X0100T2
2.6
70
2.0 17.0 - 20 + 7 + 8 1335
86
K 135D866X0100K2
1.6
30
9.0 36.0 - 25 + 15 + 15 1800
25
T 135D256X0125T2
3.2
93
2.0 13.0 - 16 + 7 + 8 1200
56
K 135D566X0125K2
1.6
32 10.0 40.0 - 25 + 15 + 15 1800
125 WVDC at + 85 °C . . . 85 WVDC at + 125 °C . . . 75 WVDC at + 200 °C
1.7
C 135D175X0125C2 15.6
1250
1.0
2.0
- 16 + 7
+8
415
3.6
C 135D365X0125C2 10.0
600
1.0
2.0 - 16 + 7
+8
520
9
F 135D905X0125F2
7.4
240
1.0 5.0 - 16 + 7 + 8
755
14
F 135D146X0125F2
5.7
167
1.0 7.0 - 16 + 7 + 8
860
18
T 135D186X0125T2
3.7
129
2.0 9.0 - 16 + 7 + 8 1130
* Part Numbers listed are for units with ± 20 % capacitance tolerance insulated capacitors. For ± 10 % tolerance capacitors, change the digit
following the letter "X" from "0" to "9"; for ± 5 %, change the digit following the letter "X" from "0" to "5". For capacitors without outer
polyester-film insulation, change the last digit in the part number from "2" to "0". For capacitors with a high temperature insulating sleeve,
change the last digit in the part number from "2" to "6". For RoHS compliant add “E3”.
www.vishay.com
4
For technical questions, contact: wettants@vishay.com
Document Number: 40024
Revision: 26-Sep-06





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)