DatasheetsPDF.com

Front-End 1U. DS1200-3 Datasheet

DatasheetsPDF.com

Front-End 1U. DS1200-3 Datasheet






DS1200-3 1U. Datasheet pdf. Equivalent




DS1200-3 1U. Datasheet pdf. Equivalent





Part

DS1200-3

Description

AC-DC / Distributed Power Front-End 1U

Manufacture

Emerson

Datasheet
Download DS1200-3 Datasheet


Emerson DS1200-3

DS1200-3; Embedded Power for Business-Critical Con tinuity DS1200 1200 Watts Distributed Power System Distributed Power Bulk Fro nt-End Total Output Power: 1200 Watts + 3.3 Vdc Stand-by Output Wide Range Inpu t Voltage: 90 - 264 Vac Rev. 9.10.09_2 2 DS1200  of 4 Electrical Specificati ons Special Features • Active power f actor correction • EN61000-3-2 harmon ic compliance • Active.


Emerson DS1200-3

AC inrush control • 1U X 2U form fact or • 21.71 W / in3 • +12 Vdc Output • +3.3 Vdc stand-by (5 V standby - c onsult factory) • No minimum load req uired • Hot plug operation • N + 1 redundant • Internal OR’ing fets Active current sharing (10 - 100% loa d) • Built-in cooling fan (40 mm x 28 mm) • I2C communication interface bu s • PMBus compliant • EERPOM for FRU data .


Emerson DS1200-3

• Red/green bi-color LED status • In ternal fan speed control • Fan Fail T ach Output Signal • INTEL, SSI Std. l ogic timing • INTEL, SSI Std. FRU dat a format • Full digital control • O ne year warranty Input Input ra­nge: Frequency: Inrush current: Efficiency: Conducted EMI: Radiated EMI: Power fact or: Leakage current: Hold up time: 180 - 264 (1200 W) 90 - 264 (1000 W) .



Part

DS1200-3

Description

AC-DC / Distributed Power Front-End 1U

Manufacture

Emerson

Datasheet
Download DS1200-3 Datasheet




 DS1200-3
Embedded Power for
Business-Critical Continuity
DS1200
1200 Watts
Distributed Power System
Distributed Power Bulk Front-End
Total Output Power: 1200 Watts
+3.3 Vdc Stand-by Output
WideRangeInputVoltage: 90 - 264 Vac
Rev. 9.10.09_22
DS1200
 of 4
Special Features
• Active power factor correction
• EN61000-3-2 harmonic compliance
• Active AC inrush control
• 1U X 2U form factor
• 21.71 W / in3
• +12 Vdc Output
• +3.3 Vdc stand-by
(5 V standby - consult factory)
• No minimum load required
• Hot plug operation
• N + 1 redundant
• Internal OR’ing fets
• Active current sharing
(10 - 100% load)
• Built-in cooling fan
(40 mm x 28 mm)
• I2C communication interface bus
• PMBus compliant
• EERPOM for FRU data
• Red/green bi-color LED status
• Internal fan speed control
• Fan Fail Tach Output Signal
• INTEL, SSI Std. logic timing
• INTEL, SSI Std. FRU data format
• Full digital control
• One year warranty
Safety
• UL/cUL 60950 (UL Recognized)
• NEMKO+ CB Report EN60950
• EN60950
• CE Mark
• China CCC
Electrical Specifications
Input
Input ra­nge:
Frequency:
180 - 264 (1200 W)
90 - 264 (1000 W)
47-63 Hz, single phase AC
Inrush current:
Efficiency:
Conducted EMI:
Radiated EMI:
Power factor:
Leakage current:
Hold up time:
40 Apk maximum inrush current
> 91% typical at high line 50% load
FCC Subpart J EN55022 Class B
FCC Subpart J EN55022 Class B
0.99 typical
1.40 mA @ 240 VAC
12 ms minimum
Output
Main DC voltage:
Stand-By:
Adjustment range:
Regulation:
Over current:
Over voltage:
Under voltage:
Turn-on delay:
Main output rise time:
+12 V @ 100 A (high line)
+12 V @ 81.6 A (low line)
+3.3 Vsb @ 6 A (5 V @ 4 A available)
±5% on +12V only using I2C
+12 Vdc; +5% / -5%
+3.3 Vsb; +5% / -5%
+12 Vdc; latches off if overcurrent lasts over 1 second,
otherwise it is auto recovery (See Table 1 next page) +3.3 Vsb, 9 A
max (hiccup mode)
+12 Vdc; 13.2 - 14.4 Vdc
+3.3 Vsb; 3.76 - 4.30 Vdc
+12 Vdc; 9 - 10.8 V (latch off)
2 second max, 5 - 50 mS, monotonic rise
5 - 50 mS, monotonic rise





 DS1200-3
Embedded Power for
Business-Critical Continuity
Logic Control
PS_SEATED (A4):
PWR GOOD (C3):
TTL logic LOW if power supply is seated into system connector. This is a short pin. A logic HIGH if
the PSU is removed
Active TTL high when output is within regulation limits.
AC OK (B1):
A low logic level if the input voltage is within allowable limits. A TTL logic HIGH level, and a 5mS
early warning signal before 12.0 V DC output loss of regulation.
PS_INHIBIT/PS_KILL (B4):
This signal is connected to a short pin on the PSU
When left open power supply operation will be inhibited. When the power supply is
inserted into the system, this pin will be pull low by the system and turn the power supply on only
after all other power supply pins have seated.
PS ON (A1):
The output will be enabled when this signal is pulled low, below 0.8 V outputs disabled when pin
is driven high or left open.
Environmental Specifications
Operating temperature:
Storage temperature:
Altitude, operating:
Electromagnetic susceptibility / Input transients:
RoHS & lead-free compliant:
Humidity:
Shock and vibration specificatons:
-10° to 50 °C ; 50% power derating at 70 °C
-40 °C to +85 °C
10,000 ft
-EN61000-3-2, -3-3
-EN61000-4-2, 4.3, 4-4, -4-5, 4-11 Level
-EN55024:1998
No tantalum caps.
20 to 90% RH, non-condensing
Complies with Astec Std. Specifications, Q3205
MTBF (Demonstrated):
500K Hrs at full load, 40 °C
Rev. 9.10.09_22
DS1200
 of 4
Ordering Information
Model Number
Nominal Output
Voltage Set Point
Set Point
Tolerance
DS1200-3
12.0 Vdc
±0.2%
DS1200-3-002
12.0 Vdc
±0.2%
DS1200-3-003
12.0 Vdc
±0.2%
DS1200-3-004
12.0 Vdc
±0.2%
Total
Regulation
±5%
±5%
±5%
±5%
Minimum Maximum Output Ripple
Current Current
P/P
Over Current
0A
100 A
120 mV 118 A - 147.6 A*
0A
100 A
120 mV 118 A - 147.6 A*
0 A 85 A 120 mV 118 A - 147.6 A*
0 A 85 A 120 mV 118 A - 147.6 A*
*Over current latches off if overcurrent lasts over 1 seconds, otherwise it is auto recovery.
Stand-by
3.3 V @ 6 A
5.0 V @ 4 A
3.3 V @ 6 A
5.0 V @ 4 A
Reverse Air Derating
1400
1200
1000
Output Power (W)
1140W @ 25 °C
1025W @ 50 °C
Air Flow
STD
STD
REV
REV
800
760W @ 70 °C
Output Power
600
400
200
0
0
20 25 50
Ambient Temperature (°C)
70





 DS1200-3
Embedded Power for
Business-Critical Continuity
Mechanical Drawing
Condition
Stand-by - ON; Main output - OFF; AC PRESENT
Stand-by - ON; Main output - ON;
Main output OCP, UVP, OVP
FAN_FAULT; OTP; Stand-by OCP/UVP
LED Status
Blinking green
Solid green
Blinking Amber
Amber
HANDLE
EMI GASKET - LEIRD 77-018
(3X) EMI GASKET - LEIRD 77-018
30.0
LATCH
81.3 ± 0.8
FAN 36 X 36 X 28MM
C19 AC-INLET
7.6
16.1
PURE ORANGE
WAVE LENGTH: 607 GREEN
WAVE LENGTH: 565
1.9
8.0 3.2
EMI GASKET - LEIRD 77-018
Rev. 9.10.09_22
DS1200
 of 4
AIRFLOW DIRECTION
279.4 ± 1.0
200.9
(3X) (200.9)
LABEL MODEL
7.02 ± 0.80
275.5 ± 0.7
PROGRAMMING WINDOW
200.9
5.7 ± 0.5
18.4 ± 0.5
7.2 ± 0.5
15.3 ± 0.5
39.9 ± 0.5
(2X) 1.5 X 45° CHAMPER
RECOMMENDED KEY
HEIGHT IS 2.5MM MAX.
68.8
6.0
9.0



Recommended third-party DS1200-3 Datasheet






@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)