Power Supplies. AEP Datasheet

AEP Supplies. Datasheet pdf. Equivalent

Part AEP
Description AC-DC Power Supplies
Feature AC-DC 6-25 Watts www.DataSheet4U.com xppower.com AEP Series • • • • • • • Universal Input 90-264 .
Manufacture XP Power Limited
Datasheet
Download AEP Datasheet




AEP
6-25 Watts
AEP Serieswww.DataSheet4U.com
xppower.com
Universal Input 90-264 VAC
Interchangeable Mains Plug, 10 Watt Models
Continous Short Circuit Protection
EN550022 Class B
Low Cost
6, 10, 15 and 25 Watt Versions
Non-standard Outputs Available
Specification
Input
Input Voltage
Input Frequency
Input Current
Inrush Current
• 90-264 VAC
• 47-63 Hz
0.2/0.09 A at 115/230 VAC (6W & 10W)
0.3/0.15 A at 115/230 VAC (15W)
0.5/0.3 A at 115/230 VAC (25W)
• 15/30 A max at 115/230 VAC (6W & 10W)
25/50 A max at 115/230 VAC (15W & 25W)
Output
Output Voltage
• See tables
Initial Set Accuracy • See tables
Minimum Load
• No minimum load requirement
Start Up Delay
• 6 W 100 ms,
10 W 240 ms,
15 W 270 ms,
25 W 280 ms
Hold Up Time
• 10 ms typical at 115 VAC,
60 ms typical at 230 VAC
Line Regulation
• See tables
Load Regulation
• See tables
Ripple & Noise
• 1 % pk-pk max (see note 2)
Overvoltage Protection • 125% typical
Overload Protection • Trip and restart (Hiccup mode)
Short Circuit Protection • Continuous (auto recovery)
General
Efficiency
Isolation
Switching Frequency
MTBF
• Typically 70% for 6 W,
75% for 10 and 15 W,
80% for 25 W
• 3000 VAC Input to Output
• 60 kHz ± 10 kHz
• >230 kHrs, MIL-HDBK-217F
Environmental
Operating Temperature • 0 ˚C to +40 ˚C
Storage Temperature • -20 ˚C to +85 ˚C
EMC & Safety
Emissions
ESD Immunity
Radiated Immunity
EFT/Burst
Surge
Conducted Immunity
Dips & Interruptions
Safety Approvals
• EN55022, level B
• EN61000-4-2, level 2 Perf Criteria B
• EN61000-4-3, level 2 Perf Criteria A
• EN61000-4-4, level 2 Perf Criteria B
• EN61000-4-5, level 2 Perf Criteria B
• EN61000-4-6, level 2 Perf Criteria B
• EN61000-4-11, 5 % UT 10 ms, Perf
Criteria B, 70 % UT 500 ms,
Perf Criteria C
• EN60950, UL1950,
CSA C22.2 No.234 cUL



AEP
Models and Ratings
www.DataSheet4U.com
Output Voltage Output Current
4.2 V
5.0 V
6.0 V
6.5 V
7.0 V
7.5 V
8.0 V
9.0 V
10.0 V
12.0 V
1000 mA
1200 mA
1000 mA
650 mA
650 mA
650 mA
650 mA
650 mA
600 mA
500 mA
Ripple & Noise(2)
1%
1%
1%
1%
1%
1%
1%
1%
1%
1%
Initial Set
Accuracy(1)
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
±3%
Notes
1. Initial set accuracy is at 60% full load.
2. Add a 0.1µF E.L capacitor to output for ripple & noise measurement at 20 MHz BW.
3. Line regulation measured from 100 VAC to 240 VAC, full load.
4. Load regulation measured from 60% to full load and from 60% to 20% load (60% ±40% load).
Line
Regulation(3)
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
AEP06
Load
Regulation(4)
±4%
±4%
±4%
±3%
±3%
±3%
±3%
±2%
±2%
±2%
Model
Number
AEP06US042
AEP06US05
AEP06US06
AEP06US065
AEP06US07
AEP06US075
AEP06US08
AEP06US09
AEP06US10
AEP06US12
Mechanical Details 6 & 15 Watt Models
All dimensions are in inches (mm)
2.83
(72.0)
2.05
2.71 (52.0)
(68.9)
1.38
(35.0)
0.50
(12.7)
0.67
(17.0)
70.87 ±1.97
(1800.0 ±50.0)
To order US add suffix’-US’ to model number
0.54
(13.7)
2.83
(72.0)
2.05
3.53 (52.0)
(89.7)
1.38
(35.0)
0.71
(18.0)
0.75
(19.0)
70.87 ±1.97
(1800.0 ±50.0)
To order European add suffix’-EU’ to model number
2.83
(72.0)
2.05
(52.0)
3.31
(84.0)
1.38
(35.0)
70.87 ±1.97
(1800.0 ±50.0)
0.67 (17.0)
To order Australian add suffix’-AU’ to model number
2.83
(72.0)
2.05
(52.0)
3.40
(86.3)
1.38
(35.0)
70.87 ±1.97
(1800.0 ±50.0)
0.71 (18.0)
To order UK add suffix’-UK’ to model number
Weight: AEP06: 0.3 lb (135 g)
AEP15: 0.35 lb (160 g)
Output Plug: 0.22 x 0.10 x 0.37 (5.5 x 2.5 x 9.5)







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)